1. New type of magnesium-aluminum plastic structure, basically zero formaldehyde, overall 1200*600 *780mm. The students are hollowed out, ergonomically designed, simple and beautiful, and rounded corners are used in all areas that are easy to collide.
2. The table top is made of 12.7mm thick double-sided film phenolic resin board, which is beautiful and durable. It is composed of special kraft paper, colored paper, surface paper, chemical film, etc. Due to the unique structure, it has excellent bending resistance and impact resistance, and can carry heavy objects and is not easy to bend and deform under pressure. Due to the use of double-sided physical and chemical film, it has more anti-warping characteristics, and can still be used in reverse, saving resources and more environmentally friendly.
3. The side adopts a three-section high-strength aluminum alloy structure, the overall specification: 562*770mm, of which the size of the upper bracket is 562*143*50mm, and the size of the lower bracket is 562*133*50mm. The column adopts an inclined design, embedded in the upper and lower cast aluminum brackets 20mm, and the rear end is equipped with a reinforced support beam. The upper and lower brackets on the side are formed by 4mm thick aluminum die-casting at one time, each part is connected with special positioning pieces, and the upper and lower brackets are connected and fixed with high-strength hexagonal socket screws 8*25. The upper bracket is designed with a power insert core hole, and a special metal fixing slot is die-casted in the center of the upper bracket at one time. It is specially used with the national standard five-hole socket. The four card slots of the socket core plastic shell can be directly snapped into the upper bracket to fix it. Do not use additional screws or glue. The upper and lower brackets each have two wiring holes with a diameter of 16mm. The power core can be used for connecting wires in the column to connect to electricity. The wiring and routing are convenient to avoid the wires from being exposed. In addition, a plastic protective cover covers and protects the power core to ensure the safety of electricity use.
4. The column adopts a rhombus octagonal structure design, the specification is 105*50mm, and the thickness is 1.5mm. The vertical plane and the inclined plane each have four sides, the angle between the front vertical plane and the inclined plane is 19 degrees, and the angle between the side vertical plane and the inclined plane is 71 degrees. A groove is arranged in the middle of the outer facade of the column, which is more convenient and beautiful when connected with the middle beam. Increase the groove edge banding to cover the screw holes, and there is no visible screw hole on the side of the table, and protect the user from the aluminum edge. The edge banding strips are sprayed in different colors to enrich the overall color matching of the table.
5. The front beam, the middle beam, the rear beam and the middle and lower beams are all made of high-strength extruded aluminum alloy mold profiles, and the surface of the aluminum material is treated by epoxy resin outdoor powder electrostatic spraying. The size of the middle beam is 37*28mm, and a unique aluminum tear line is designed on the aluminum material. After the middle beam is installed, an empty slot can be torn out from the aluminum material, and the power cord is placed in the slot to maximize the protection of students The electricity is safe, and the power wiring is convenient. The size of the front and rear beams is 50*41mm, and the front semi-circular arc ergonomic design is adopted, the arc angle is R30, the thickness of the mounting screw is 1.7mm, and the other thickness is 1.2mm. The rear beam is equipped with a water-retaining strip assembly chute to facilitate the installation of the water-retaining strip. The size of the water-retaining strip is 14*52mm. The size of the middle and lower beam is 150*19mm, and the upper and lower waist design is adopted to strengthen the strength of the beam.
6. The back water retaining strip is integrally extruded by the mold, and the bayonet water retaining strips of different heights are fitted according to the table tops of different thicknesses. In addition, it is equipped with aluminum alloy water retaining block of corresponding size, which is used to fix the aluminum alloy table corners and water retaining strips on both sides. The aluminum alloy water block is formed by die-casting of aluminum alloy, and the surface is electrostatically sprayed with epoxy resin outdoor powder.
7. Lower bracket feet: Both ends of the lower bracket feet are provided with a round hole with a diameter of 10mm, which can be fixed to the ground by a blast screw or used with an adjusting foot with a diameter of 50mm. The adjusting foot is integrally injection molded with a 12*50 national standard screw and high-quality plastic, which has strong load-bearing capacity. The side corners of the table are equipped with decorative covers with ABS foot covers in different decorative colors.
Audited Supplier 
){kind=link}